Choose your country of delivery to see prices and products for your location.
CorroFilm - Corrosion protection for every aluminum frame, spray can (400ml, incl. spray hose)
Specially designed to protect aluminum from corrosion, especially in salt water conditions. Creates a clear, UV-resistant, quick-drying protective layer.
DANGER.
Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness. Safety instructions: Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves/protective clothing/eye protection/face protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Seek medical advice/attention. Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F Special labeling of certain mixtures Repeated exposure may cause skin dryness or cracking. Hazard-determining components of labeling acetone; 2-propanone; propanone n-butyl acetate, ethyl acetate
Choose tax zone / country of delivery
Corrosion protection. After spraying, CorroFilm produces a quick-drying, transparent, hard, thin film with excellent protective properties. It protects all metallic and painted surfaces against corrosion. Dust-dry after approx. 20 minutes, touch-dry after approx. 60 minutes. The long spray hose can also be used to treat the inside of pipes and ducks, for example. An indispensable protection when, for example, folding boats with aluminum poles are used in salt water.
Application: Shake can before use. Carefully remove grease and dirt from the materials to be treated (aluminum, steel, brass, copper), e.g. with white spirit. Spray on a thin and even layer. If necessary, also spray the inside with the spray hose (e.g. rodes). Allow to harden for 4 hours. An annual application is recommended.
Please see our privacy notice